how can you tighten the belt on the z axis, in kobra 2 max?
Does anyone know if it is possible to put some other hotend on the kobra 2 max, with better cooling, if there are any, please drop the name or some videos with them
I will definitely tell you about the result. But at the moment he is busy with long-term printing and I don't want to touch him while everything is fine
I have a kobra 2 max, it has happened many times that the version of the model goes sideways and prints as if nothing happened, what is the problem?
I replaced and the printers work
I was interested in why this happened in order to prevent it in the future
Thanks for the advice, but the coil is new, on all other printers as well and yes, I print pla
There are 4 "kobra 2 mach" printers in the mega, I used an anycubik slicer at the beginning, but after a while I switched to an orca slicer and after a while the plastic did not come out of the nozzle, and I had to replace the components on all printers (hot end). Has anyone had this, what could be the problem, how to solve it?(Sorry for my English)
Hello, I need help. I have a 3D model of a house and I need to insert a 360 picture from certain coordinates and project a texture onto the model from it, and so it takes many times for the texture to change according to the script
Вкладайся в освіту, то не обов'язково має бути шкільна. Пробуй розвиватися в цій сфері, в якій б хотів працювати, читай книжки і вчи мови, як мінімум англійську. Поки від тебе багато не вимагають і нема великої відповідальності, в тебе є час, і потім ти зможеш знайти нормальну роботу.
there are red screws, twist so that the belt is taut, but not too tight
What the hell?
anycubic