Yeah I bought it from a family member. It’s a silver long bed. I’ll be interested to hear back on if you like/notice a difference with Amsoil

Sounds like a fantastic truck. I’ll be upgrading my trans through fire punk diesel soon here. For now it’s bone stalk with exception of bags. If you’re not using it, I highly recommend AMSoil injector lubricant. Doing better on mpg and I can tell the engine runs smoother with it. Sorry you had the problems you did! Luckily the 5.9 can take it haha I was very fortunate to pick mine up for 10,000 cash at 83,000 miles. 2006 2500 quad cab 4x4 Laramie.

How you liking your 06? I’m at 102,000 miles everything is ok but I need to be sure to use fuel lube or my 6th injector gets stuck in open or closed position

Different truck but I had a similar situation. My cousin filled my 5.9 Cummins with gas. Empty tank 50 miles.. truck was fine after drain. 40,000 miles later still no issues

Awesome thanks for the tips. Ill look into that, they really make it hard to do that by only allowing 68 characters for the explaination.

I see. So maybe not the best route to take? Do you know of anything better that could be put there?

What did you put in the box that asks you explain why you are submitting for Higher Level?

Just posting for visability. To fix this issue you need to open up the side with the elastomers, pull all of the elastomers out. Then get something long enough that fits inside the tube and push down on on the bottom of the tube while at the same time pulling the handbrake. This will force the air out the fluid back in to fill the void. I pushed rather hard on the inside of the tube while slightly pulling the handbrake and realsing, pull it a little more realse, little more realse, then i did one or two big pulls. Once done, dont pull the handbrake again until you have all of the elastomers back in and the cap screwed back on.

Side note: I asked the engineers if you can you use the springs from the spring upgrade kit in place of the elastomers. They said you can, so I am rocking the brown spring in the middle of my stack, in place of 3 elastomers. It feels really good.

Yeah, there is still fluid. It needs to be bled, I looked at it for a while and didnt see a way that I could do this.. Ill post once I figure it out

I didn’t open the reservoir but it didn’t appear to have leaked at all.

Can anyone help with TB-RS Handbrake lost hydro pressure.

I race in VR and at somepoint the hydro tube got knocked over so it was no longer up right. As a result i lost hydro pressure. Does anyone have a fix for this? Thanks in advanced!

I’ll give it a shot! Thanks

Yeah, most likely safer this way. Bummer my switch is a little bit of a pain to get too. Hopefully an update comes out at some point that will prevent this.

Using a custom keyboard right now. I have a IDOBAO ID63, which I actually am not a fan of the key layout.. IDOBAO kailh elf silent switch's, these switch are perfect! And beautiful cerakey caps.

Well that’s easier than leaving game and joining a new one! Do you just unplug at the base or use the switch on the cord?

Help wheel bases looses FFB

I own the alpha mini and I play in vr. Sometimes the game opens windowed and when I click the game window I won’t have any ffb. Also If click out to change a song on YouTube, once I click back into the game I won’t have ffb anymore. I do have the latest updates for the app and firmware for my equipment. Has this happened to anyone and does anyone know a fix? Thanks in advanced!

awesome, thanks for the reply. Just ordered the kit.

Would you mind sharing your color use and orientation of the set-up?? Thanks!

Hey, i just got my new p1000 modular pedals and out of the box the brake is wayyyy to stiff. So you are saying you replace the rubber rings on the inside with a spring?

I will see if I can get a good shot and post it. I’ll tag you if I do. Thanks

I’ll note that. Thank you