I race in VR and at somepoint the hydro tube got knocked over so it was no longer up right. As a result i lost hydro pressure. Does anyone have a fix for this? Thanks in advanced!
View all comments
Is there any fluid in the hydraulic reservoir left?
I didn’t open the reservoir but it didn’t appear to have leaked at all.
Just making sure. Probably need to bleed the air out of the system. In sure of how todo that tho.
Yeah, there is still fluid. It needs to be bled, I looked at it for a while and didnt see a way that I could do this.. Ill post once I figure it out
Just posting for visability. To fix this issue you need to open up the side with the elastomers, pull all of the elastomers out. Then get something long enough that fits inside the tube and push down on on the bottom of the tube while at the same time pulling the handbrake. This will force the air out the fluid back in to fill the void. I pushed rather hard on the inside of the tube while slightly pulling the handbrake and realsing, pull it a little more realse, little more realse, then i did one or two big pulls. Once done, dont pull the handbrake again until you have all of the elastomers back in and the cap screwed back on.
Side note: I asked the engineers if you can you use the springs from the spring upgrade kit in place of the elastomers. They said you can, so I am rocking the brown spring in the middle of my stack, in place of 3 elastomers. It feels really good.