1/2
I just bought the 7750 as it was on an insane sale. Didn’t get it yet but was wondering about the drinks quality as I saw zero review online.
Will do when I get it. Deal was too good to pass up even though I don’t really need a machine this advanced.
Just bought the CM 7750 for CA$3799. Worth it?Purchase Advice
I’m really wondering how good of a shot it makes. What I like about the machine is the multi hoppers and auto descale.
Not many reviews out there. Can someone shed some light how good are the shots compared to a decent coffee house?
Just purchased Miele CM 7750 for CA$3799. Worth it?Discussion
Title.
I’m an avid coffee drinker but I’ve never really had a super automatic. I wonder if any one could compare Miele 6360/7750 shots to a proper coffee house.
Main reason I wanted the 7750 is the 3 coffee hoppers and auto descaling.
What kind of stories? I won’t be finalizing the build without quad motor that’s for sure.
Do I commit to buying the car if I go ahead and configure it?
Ontario - Can Configure R1S Now
R1S
Title.
I reserved one in April ‘23 and just checked and I can configure my car.
There is no quad motor option. Is this intended? I’m not interested in dual motors.
Ah - I don’t need to span a single window to 2 screens. I’m doing 2/3 and 1/3 PBP as it works best for sharing the smaller screen on MS Teams as I’m pretty much online all day.
That’s bad. I don’t have this at all. I think that’s caused by low refresh rate. I’m running both screens at 60Hz.
This is the pair that worked for me:
GIDi [2 Pack] USB C to HDMI... https://www.amazon.ca/dp/B09PJZHFNT?ref=ppx_pop_mob_ap_share
Use hdmi for both inputs and it will work fine. I had the exact same issue with the hdmi/do combo. Switching both to hdmi solved it.
Issue turned out to be the HDMI adaptors. Replaced them (with cheaper ones) and now everything works ok.
You might want to certify a few adaptors and recommend them to customers.
Issue turned out to be the HDMI adaptors. Replaced them and now everything works ok.
FYI; connected DP to TS4, and HDMI directly to Mac; everything works as expected, but that defeats the point of buying a high-end dock that should support dual 4K at 60Hz.
I just swapped one HDMI for DP. Same results; in 50:50 DP gets 60/120Hz options while HDMI gets 30Hz. I tried different HDMI cables/adaptors, no dice.
I'm having all both other issues you mentioned: not all resolutions are listed for the G9 when connected to your dock. Waking from sleep also like resets everything and I'd have to reconfigure the resolution every time.
Hi. Yes I did all of those steps but nothing helped.
I’ve seen multiple posts on Reddit on people facing the same issue. Were they usually resolved or should I start a return?
TS4, G9 57" and PBP
Hi,
I'm running into issues with TS4 and G9 57" and PBP.
2 cables are connected using 8K USB-C to HDMI on TS4. I can only get one at 4K 60Hz and the other is stuck at 30Hz. I just got got the TS4 and everything is up to date (firmware and power delivery).
When the screen is split 21:9 and 11:9; the smaller screen resolution is messed up and can't be configured to the right scale.
This is quite frustrating for a C$500 dock. Spent hours troubleshooting and it just won't work.
Please advise.
EDIT: issue turned out to be the USB-C HDMI adaptors even though I bought a higher end one. Cheaper ones arrived today and they work just fine.
That's what I did with BetterDisplay. Configured PBP with 2 screens each at 2560x1440 HiDPI (credit goes to another poster in another thread) and it works ok, but I now have to manage 2 screens instead of one.
Don't be mislead. No way you can run it at full native res and sit 2 feet away.
What’s wrong with chipotle
Habanero Taqueria on trafalgar closed
oakville