You have to choose Print or Buy https://www.ebay.de/itm/174702464527
Hey,
I´m going to Klipper a Anycubic Kobra 2 Plus. ive got from the Firmware in the Korba2 a Unmodifiable_printer.cfg there is written the Position of the Nozzle Z height probe. Where i can Put this Code in?
[]
[auto_leveling]
target_spot_x : 64.600000
target_spot_y : 339.600000
[probe]
z_offset_adjust : 0.393000
Wie geil bist du denn bitte!
Hello guys,
im modding actual my Kobra 2 PLUS!
Hardware is a BigTreeTech Manta M8P v2.0 +CB2 + TMC2209
Here are my first attempts for printer.cfg
https://github.com/crazybanane/Manta-M8P-V2-for-Kobra-2-Plus
There are some Challenges:
If you can`t connect the Board directly to LAN on the first time because you only had wifi then:
-Don´t flash the board first via EMMC!!!!
Create a boot SD Card and setup the system.cfg file with your Wifi informations then follow the Instructions from BTT PDF!!!
Hello guys,
(Solution found mor down)
i tried to flash the CB2 via SD Card to EMMC but it wont work. i tried like the description it said but it doesnt show up that i can flash to EMMC it shows only UP Update Bootloader on SD Card.....
What setting i have to made? Theres not enough info about that in the description.
Solution:
Flash the image again on CB2 (EMMC) after flash the Board set another state. The "Loader State" then you can go to Tab "Advanced options" and there on "Erase all"
After this follow the normal instructions in the PDF from BTT
Os it so hard on max to get good first layer? i own only a plus and i didnt had many problems with first layer.
Hello i got a second time Problems with my Posting. Under the first post you see a Picture (from a Cat) that i dont have attached. In the editor there is no option to delete this Picture. How can i delete this?
Can you please make a Photo of your nozzle and Tell what nozzle this is? Manufacturer etc.
Hello,
recently i bought some new Nozzles and for better Choices i changed my Heatbreak too.
I switched to 0.6 nozzles and because of that i print most of the Time PETG i tried some special coated Nozzles.
The first pair that i bought were PTFE Coated nozzles.
After 2 Spools i can say now DONT BUY THESE!
I got Problems with faster Printing very bad Print Quality and many Trash Prints.
The Second Pair of Nozzles are Copper/Nickel coated Nozzles (the silver ones).
After i changed to these it changed the World.
Pretty nice First layers no Bad looks, good Prints and Faster prints were doable.
What are your experiences with nozzles for Kobra 2?
Have a nice Day
Hello since some days i can`t edit my e.g. 1st Post on PC tried different Browsers and other Devices. On Smartphone it works. Wheres the Problem? Other people in this Rediit has the same problems.
Can you give us more Informations about settings you selected?
Get a clean USB Drive and copy the FW 2.1.0 on it. put it to USB with Cam logo on it restart printer and wait a little time. I cant reproduce the problem but can you send me DM with your printer.cfg file that corrupted your FW?
Yeah you can Roleback FW but this isnt a FW issue. You have to Set the Z-Offset new. If you really want to Roleback the Look Here. https://www.reddit.com/r/anycubic/s/eVinE80Ods
Im Not so professionell into this but i think it isnt to hard to Change the Mobo and config it with Klipper. I thought about an Manta M5P Board that should be small enough. The only Thing is that you have to Change many of the Connectors.
Helllo i got problems with my Ball bearings they are dead. Is there someone who knows where i can get some good SG15 Bearings. The bearings on Amazon are sh*t. It would be nice if they where delivered from Europe.
Thanks
looks like something of those:
-too fast
-clogged nozzle
-wrong temps
-extruder too lose
-retraction settings
do you tried to manual heat bed and nozzle?
did you updated to the latest fw?
There are hexagonal screws ON bed an ON the printhead movement.
Question did the printhead move normal when Auto Levelling? IT Sounds Like wrong connection ON the Stepper Motors. Or did you fasten the screws for to tight for Printhead or bed ?
Hello i got problems i wanted to print a Project but this has to be good in dimensions.
for test i printed a Circle with inner diameter 110mm outer diameter 116mm. i got 109,6mm and 115,7mm. Where i can set the correction or steps?
4 Options:
-Nozzle is dead
-printbed is not enough cleaned
-Wrong print settings
-Wrong zheight (bad leveling)
I tip for 2 and 4
Weird voids?
anycubic