What the hell?
ProblemView all comments
tighten the belts that move the axis
Ok How do i set the correct tension on them? Ive looked but haven't gotten a straight answer!
Tighten 1/2 turn and try again.
But, I have found that mine (when it was new) was layer shifting Y when printing the 22min benchy. Belt was not the issue for me. I set the current from the 800 to 1100 and the 22min benchy came out as good as it was going to get.
"Set the current from 800 to 1100" Ok Im not sure what are referring to with that statement.
The stepper driver current. Mine was set for 800mA.
I set it to 1100mA. Max is 1200mA.
For the Y axis. My Kmax needed it to sling that big bed that fast without skipping steps.