Is it me or does that look like your burn in layers printed straight across. You should check your LCD with the test. Apply light pressure like as if the plate was resting on it and see if it might be a faulty cable/screen. Apart from that I would say space out the models a bit more from each other (since I can't see the top I'm going by the print) and relevel might be a good idea.

Much appreciated ☺️. Give it a go on printing it! It's just a pain to sand certain parts but totally worth it.

Thank so much!

Thanks! Credit to the artists of Wicked3D for providing the amazing model.

I agree also their loyalty program is great. I have been with them for a year and a half on 2 of their Patreons and have gotten their entire backlog as a loyalty bonus

I have almost exclusively printed their stuff apart from a few I buy from CG trader or cults3d. Their stuff is high quality, it's refreshing to not have to worry about "adjusting" the prints too much

About 22in tall and about 9in wide 7.5in deep. It's not that heavy either, about 3lbs I would say.

12 pieces for the alien, 12 for the alien, 9 for the base (printed in PLA and resin)

I knew I forgot something! Lol

I have come across a bunch of great models but Patreon seems to be the way to go nowadays. This is from Wicked3d's Patreon but you can also buy them individually. Cults3d also has some great ones. It all depends on what you like and what you would want to print and paint for yourself.....or people.

Thank you!

So this was a commission piece that I just finished and decided to do a little photoshoot. These are just some of the pics that I feel really give it feeling. Hope you all like it. Printed on the Elegoo Saturn 3 Ultra using SunLu Standard Resin.

Stay tuned for more prints coming soon!

So this was a commission piece that I just finished and decided to do a little photoshoot. These are just some of the pics that I feel really give it feeling. Hope you all like it. Printed on the Elegoo Saturn 3 Ultra using SunLu Standard Resin.

Stay tuned for more prints coming soon!

A mixture of both really. I used settings I got from groundeffected for auto supports and then cleaned up with some manual supports. They come off like butter with the right settings.

I believe it was 24 pieces in total for the whole statue and base.

Printed on the Elegoo Saturn 3 ultra and the Phrozen Mega 8k. had a commission to make it look as statue/comic book sketch as possible so did multiple dry brushes of different shades of white and grays to add depth. The statue in total measures 28in tall.

Fauxhammer on YouTube has a great tutorial on how to use this test but basically the posts have to match the holes to get it dialed in almost perfect and then I would move on to the cones

Using meshmixer you can use the make solid function and it should fix this. Make sure you select keep sharp edges and increase the resolution to get the best outcome.

Is this exclusively FDM?

I appreciate it. It's a lot of work but it's so rewarding to see your creation take on some life in color.

To be honest this Cape is a bit of a thick one and I hollowed out to a 1.8mm thickness. I was scared it was going to be too heavy to be supported but it is holding well. Plus the epoxy sculpt holding it in place helps too.