Aight cheers!
Would PLA be good for this, or is it too soft?
Did 80mm/s2 for outer and 120 for inner walls. Also because Power Loss Recovery was too much for that poor board. Utterly ridiculous.
Yeah it was more of a hack for an old machine with no open EEPROM. PA is much more practical.
Yeah but why is it so massive??? Is that really just on thread all the way through? Why does it stick out so far??
I've also done super low wall acceleration with high jerk and speed on my old Sidewinder. Is more time efficient imo.
I'd say on the side and make overhangs printable, but that might not work with the holes.
Oh oops lol
- Print warping off bed
- Underextrusion?
- No cooling duct in sight.
- Godawful heatblock configuration.
- Not even a heatbreak, that looks more like a super volcano threaded all the way through.
Mate at that point just start making your own pics.
It's a built in feature of Prusa and Orca.
If you don't want to, I would print it on the side, with the holes on the low side I guess.
Nvm that's quite an overhang... Could maybe chamfer that if it's your design.
It doesn't have to be family or smth. If you have a friend you can have a more serious conversation with.
My granny also kind of acts like our family therapist from time to time. A couple of us go to therapy or special schools.
But tbh, I don't know what your direct circle is like, but having a serious talk that you're massively overwhelmed is better than hiding it and having them find out when it's too late.
Or maybe just, you know, therapy? They get paid for it.
I think seeing the bumbs is part of the charm of this cam. Stabilising it would just make it similar to the T-cam
The visor usually does double duty as sunglasses.
Man can role play being in the top 5 for a bit. Must be nice
Nah that's the corner before the hairpin.
I just default to the bruh face, no matter if it's funny or not. Safe option. If it's really funny I'll shatter eardrums from laughing, but that's the other end.
You could make a plain model and apply a texture in Ideamaker.
Ponder how deep you are willing to go engineering, then find a good YouTube channel that matches that.
Yeah gamma radiation is just high frequency light. Maybe all the others have a visible spectrum that includes it.
I'd say since there was no contact and no one went off track I would let this slide. It's also just impressive driving.
Alright the shipping costs are kinda scummy, if most other brands just give the price including it.
I've heard bad things about the chamber heater, and I don't really like how the 5M is set up from reviews.
Sorry if I'm being a bit picky.
$5-$10 from the looks of it. Does it have to be Ultimaker? It seems to be quite expensive compared to other good brands (more then $40/kg compared to $20/kg)
If that was moisture from the filament, I assume that's on its way to being ventilated out.
What is going on here?
3Dprinting