Hi, it's the first time I'm measuring. This is a 2.0 setup and I got this weird curve, and the yellow bar at 1KHz seems like something went wrong. I can't seem to find anything explaining if this is normal or not in the manual. Any hints?
But did you upload the correct calibration file and position for the mic?
Does this second one also look bad? I don't understand why it cuts at 15k
The linked picture looks much better, yes. What speakers do you have?
Dynaudio special forty.
All I did was measure again. I thought it had to do with ausb extender I used (the umik cable is rather short and in using a desktop computer) but when I tried again the result is the linked on.
Either way, I don't sonically like the result. It feels like it muffles the mids and highs too much. Feels rather canned.
Maybe have a look at this and see if all your speaker and mic levels were set correctly at the start https://mehlau.net/audio/dirac-live-2-mic-speaker-levels/
That in itself could be an issue if they were off to begin with.
Cant help with the weird HF cutoff but most people do prefer to cut Dirac off at 300-500 hz, rather than trying to correct full range.