Hi guys so im using anycubic kobra pro and i want to print a 1mm thickness cylinder, what setting do you recoment ( im using a trasparent fillament petg)
Generally speaking for printing PETG: 80° bedtemp for the PETG, nozzletemp according to the finding of your temptower for that specific filament, print speed about 80-100mm/s (max), no cooling for the first (few) layers and overall (much) less cooling than PLA. Avoid any cold airstreams hitting the buildplate, as PETG like to warp off the bed then - I personally use enclosures for my printers and that was a great advantage for printing PETG.
The rest depends on what you want, like wall thickness, infill, layer height etc..
Generally speaking for printing PETG: 80° bedtemp for the PETG, nozzletemp according to the finding of your temptower for that specific filament, print speed about 80-100mm/s (max), no cooling for the first (few) layers and overall (much) less cooling than PLA. Avoid any cold airstreams hitting the buildplate, as PETG like to warp off the bed then - I personally use enclosures for my printers and that was a great advantage for printing PETG.
The rest depends on what you want, like wall thickness, infill, layer height etc..